Geerady Lifepo4 Battery Manufacturer is a professional supplier of lithium-ion batteries and power solutions.

Why do you have pure water to the battery regularly?

Why do you have pure water to the battery regularly?The boot battery 'battery is running, the temperature is increased, the charge and discharge is frequent, and the moisture in the electrolyte consumes, and therefore, it is necessary to give the pure water regularly to make up for the water consumption. The driving staff should determine whether to supplement the water by checking the battery liquid. The ordinary battery should be hydrated once per month, and other batteries should be given water and regularly given pure water. For batteries that are not used, it can be replenished for months. After making the battery, it needs to be supplemented with it.   If the liquid is faster, the water is faster, and the hydration is frequent, and whether it is checked whether the regulator limit voltage is too high. Excessive highlights appear, the moisture consumes large, evaporate, and resolved by adjusting the limit voltage. If you have a decline in a battery, you have to check whether a micro-short circuit is generated. In addition, it is necessary to see whether there is a crack in the battery tank, whether the electrolyte is leaking, and then processes after the trick.   The battery is running normally, can only hydrophone, do not add electrolyte, and can not add concentrated sulfuric acid! If the battery is poured, the electrolyte can be supplemented when the original electrolyte is lost. Then, according to the original electrolyte density. Sometimes the vehicle can not be launched, think that the storage is insufficient, and the electrolyte is added to the battery. As a result, it will be counterweight, shorten the battery life.     In use, whether it is charging, or discharge, electrolyte sulfuric acid is internal consumption and regeneration; the amount of sulfuric acid is very small. The decrease in the electrolyte liquid is only reduced by moisture, and it is only necessary to supplement pure water. If the battery is insufficient, it does not work, and the battery should be removed and repaired. The method of checking the liquid surface height of the battery is to detect within a flat tube insertion tube in a flat tube in an inner diameter 3-5 mm, and the starting battery liquid level height is highly preserved 10-15 mm. You can also detect a clean bamboo and wood, do not detect a metal stick. Recommend: LiFePO4 Battery Manufacturer Energy storage battery Manufacturer Integrated machine energy storage battery series Manufacturer Lead lithium battery Manufacturer Outdoor Backup Battery Manufacturer Portable outdoor power supply Manufacturer Power battery Manufacturer Powerwall LiFePO4 Battery Manufacturer Battery rack Manufacturers Telecom LiFePO4 Battery Manufacturer Wall mounted battery storage Manufacturer China Lifepo4 Battery LiFePO4 Battery 48V 150AH LiFePO4 Battery 48V 100AH