The forklift battery is not required to reach the nominal capacity in use. First, consider whether the battery is insufficient or after use, check whether the density of the electrolyte density is low, whether there is a density increase after charging, if the density does not change It should be considered that the outer wiring is not smooth, the resistance is large. This is because the forklift battery charging If the operation is not professional, it will cause our equipment to malfunction, so we have to conduct a professional charging operation.
The requirements for the charging process of the forklift battery are the basis for analyzing various charging technologies. The basic requirements for the forklift battery to charge are: the charging current should be less than or equal to the battery to receive the charging current. Otherwise, the excess current will cause the electrolytic water to consume too fast, increasing the water loss rate of the forklift battery, increasing the maintenance workload, for the maintenance battery, will result in the early failure of the forklift battery; Cause environmental pollution, endanger the health of workers; reduce charging efficiency, resulting in severe waste of energy.
In addition, after the forklift battery is charged, the voltage of each monobi battery should be around 2.1 volts, which is also an item we need to check after the charging work is completed to ensure the service life of the forklift battery.
LiFePO4 Battery Manufacturer
Energy storage battery Manufacturer
Integrated machine energy storage battery series Manufacturer
Lead lithium battery Manufacturer
Outdoor Backup Battery Manufacturer
Portable outdoor power supply Manufacturer
Power battery Manufacturer
Powerwall LiFePO4 Battery Manufacturer
Battery rack Manufacturers
Telecom LiFePO4 Battery Manufacturer
Wall mounted battery storage Manufacturer
China Lifepo4 Battery