Geerady Lifepo4 Battery Manufacturer is a professional supplier of lithium-ion batteries and power solutions.

Precautions before the forklift battery before charging

Precautions before the forklift battery before charging(1) Before the inspection before the forklift battery is charged, it fully inspects the forklift battery and the affiliate parts, and the container has no rupture, and the attachment has shortage, and cleaning treatment work.
(2) Perfusion electrolyte According to the provisions of the forklift battery, it is equipped with an appropriate density of electrolyte, then injects the forklift battery, and checks that each single-finished forked battery is inspired with a 0-3 volt DC voltmeter.
(3) Perform charging The correct connection of the charger and the forklift battery, the positive end of the positive terminal of the forklift battery, the negative end of the forklift battery, and charging the power supply according to the prescribed primary charge current. The charging process is usually divided into two phases.
The first stage of charging current is from 1/1/1/1 / 16 of the C20 of the rated capacity, charged in the electrolyte, and the end voltage of the single-finished fork of the battery reaches 2. 4 volts. The current is then lowered, transferred to the second stage charging, and it has been charged to the electrolyte dramatically, the bubbles, density and the voltage are stable for 2-3 hours. All charging time is about 60-70 hours.
The electrolytic solution temperature should be measured during the charging process. When the temperature exceeds 35 ¡ã C, the charging current should be reduced, but the charging time is extended. If the temperature continues to rise to 40 ¡ã C, the charging should be stopped immediately, and the charge is then charged to 35 ¡ã C or less. During the initial charging process, except for special circumstances (the charging device is faulty, etc.) is not interrupted within 20 hours.
(4) Adjusting the electrolyte density and liquid level at the time of initial charging, due to the electrolysis of water, the liquid level of the electrolyte is lowered, the density will change, the charged forklift battery must immediately adjust the primary electrolyte Density and liquid level heig  Recommend: LiFePO4 Battery Manufacturer Energy storage battery Manufacturer Integrated machine energy storage battery series Manufacturer Lead lithium battery Manufacturer Outdoor Backup Battery Manufacturer Portable outdoor power supply Manufacturer Power battery Manufacturer Powerwall LiFePO4 Battery Manufacturer Battery rack Manufacturers Telecom LiFePO4 Battery Manufacturer Wall mounted battery storage Manufacturer China Lifepo4 Battery