Four points of the forklift battery repair
1. First check the display of the charger and the recording of the charger before the connection of the charger battery and the charger. If there is an error message on the charger panel, the charging of the general battery is not completed. When the charger fails, the charging process is interrupted. At this point, please contact Lind's after-sales service personnel. When the state of charge is normal, the average voltage of the unit, the output capacity, and the end of the charging end, and then the connection of the battery and the charger is disconnected.
2. Clear dust on the surface of the forklift battery, avoid the formation of a discharge circuit on the surface of the battery, shorten the battery discharge time. But please pay attention not to rinse with water, just wipe it with a clean cloth.
3. Check the connection of the forklift battery pack to the battery power output line to ensure that the battery is connected well, ensuring that the current output is stable.
Nanjing Xiahua battery capacity hourly rate: 1HR, 2HR, 3HR, 5HR, 8HR, 10HR, 20HR, 100HR
4. After connecting the battery plug to the forklift battery power outlet, check whether the level of each battery electrolyte is within the standard range. If the liquid level of the electrolytic solution is low, distilled water should be added to the standard range (generally required the liquid surface of the electrolyte to cover 10-15 mm. Conditional can use the automatic water heating system of the battery to ensure that the water is properly added The liquid surface). Conditionally use the battery's automatic water heating system to ensure that the level of water is properly added. The battery is connected to the power outlet of the forklift battery after the fusion.
The main parameters of Wuxi Huizhong batteries have capacity, rated capacity, voltage, open circuit voltage, charging voltage, termination voltage, power, life, discharge time, charging time
Forklift battery standard cycle
The forklift battery is the main components of the logistics industry. If the cycle is not developed, the efficiency of logistics processing will be greatly reduced. The diesel forklifts are seen in our daily life. Diesel engine driven forklift environment, emissions a large amount of exhaust gas. It will inevitably be replaced by the electric forklift in the future. The traditional forklift battery steering system adopts a mechanical steering or hydraulic power steering. The disadvantage of mechanical steering is that the manipulation is large, the operator is easy to fatigue, and the disadvantage of hydraulic power steering is to waste energy. The electron steering is not only small, but also about 25% more than the hydraulic power.
LiFePO4 Battery Manufacturer
Energy storage battery Manufacturer
Integrated machine energy storage battery series Manufacturer
Lead lithium battery Manufacturer
Outdoor Backup Battery Manufacturer
Portable outdoor power supply Manufacturer
Power battery Manufacturer
Powerwall LiFePO4 Battery Manufacturer
Battery rack Manufacturers
Telecom LiFePO4 Battery Manufacturer
Wall mounted battery storage Manufacturer
China Lifepo4 Battery