Geerady Lifepo4 Battery Manufacturer is a professional supplier of lithium-ion batteries and power solutions.

Maintenance-free battery and traditional battery difference

Maintenance-free battery and traditional battery differenceTraditional batteries will undergo reduction phenomena during use, which is due to the lead in the grid, which causes the lead in the negative electrode plate, resulting in over-decomposition of water, and a large amount of oxygen and hydrogen spills from the positive and negative plates, so that the electrolyte reduce.

The maintenance-free battery is made of lead calcium alloy. Since the battery is used to make a grid, the water produced during charging is small, the moisture evaporation is also low, and the outer casing is used to use a sealing structure, released sulfuric acid gas. There is also very little, so it has the advantages of less than the traditional battery, there is no need to add any liquid, the wiring pile, the wire and the body corrosion, the anti-charging capacity, the start of the current, the length of the battery is long, etc., recent years It is very popular in China.

The battery of the battery can be reflected on the dashboard. When the current table pointer does not display insufficient storage, it should be charged in time. Sometimes the amount of power is not enough during the road, the engine is turned off, and as temporary measures can be used to help other vehicles, the vehicle is used to start the vehicle, and the negative electrode and the negative electrode of the two batteries are connected. .

The battery is not used for a long time, it will slowly discharge it until it is scrapped. Therefore, a car should be started every other period of time to charge the battery. Another way is to pull the two electrodes on the battery, it is necessary to focus on positive and negative two electrode lines from the electrode column. To unplug the negative electrode line, or remove the negative electrode and the car chassis, then Pulling the other end with the positive log (10).

The battery has a certain service life to replace it in a certain period of time. In the case of replacement, the above order is also followed, but when the electrode line is connected, the order is exactly the opposite, first pick the positive electrode, and then connect the negative electrode.  Recommend: LiFePO4 Battery Manufacturer Energy storage battery Manufacturer Integrated machine energy storage battery series Manufacturer Lead lithium battery Manufacturer Outdoor Backup Battery Manufacturer Portable outdoor power supply Manufacturer Power battery Manufacturer Powerwall LiFePO4 Battery Manufacturer Battery rack Manufacturers Telecom LiFePO4 Battery Manufacturer Wall mounted battery storage Manufacturer China Lifepo4 Battery